Table Top Medical Dental Autoclave Steam Sterilizer Machine

Model:CNME060326

The desktop sterilizer is a small, efficient high-pressure sterilization device that is usually placed on a table for use. It is suitable for small medical and research environments such as clinics, dental clinics, beauty salons, and laboratories with limited space. It sterilizes microorganisms such as bacteria, viruses, fungi and their spores through high-temperature and high-pressure steam sterilization to ensure the sterility of the instrument.

Characteristics:

Indicator light indicates working state.

For 4~6 minutes rapidly sterilizing.

Sterilizing temperature and time can be preset.

Steam-water inner circulation system: no steam discharge, and the environment for sterilizing will be clean and dry.

Over temperature & over pressure auto-protection.

Safe protection of water lacking.

Exhaust the cool air automatically.

With three stainless steel sterilizing plates.

The chamber of the sterilizer is made of stainless steel.

Automatically shut off with beep reminding after sterilization.

Technical Data:

Preparation before use

Before you start using the desktop sterilizer, make sure the following preparations have been completed:

1. Clean the work surface: Clean the work surface thoroughly to ensure that there is no debris and dirt.

2. Check the status of the equipment: Ensure that the power cord, control panel, indicator light and other parts of the desktop sterilizer are intact.

3. Prepare sterilizer reagents: According to the instructions of the equipment, prepare the sterilizer reagents in the correct proportion. Make sure that the reagents are not expired.

Usage steps

The following is the use process of the desktop sterilizer:

Step 1: Prepare items

1. Place the items to be sterilized in the prepared plastic container. Make sure that each item is kept at a certain distance from other items for better sterilization.

2. Open the reagent bottle and pour the reagent into the plastic container according to the requirements of the equipment, ensuring that each item is fully covered by the reagent.

Step 2: Set sterilization parameters

1. Turn on the power switch of the desktop sterilizer and connect the device to the power socket.

2. Set appropriate sterilization parameters, such as temperature, time, and pressure, according to the type of reagent and the different items. The sterilization parameters generally have corresponding adjustment buttons on the control panel of the device.

3. After confirming that the settings are completed, press the start button to start the sterilization process.

Step 3: Wait for sterilization to be completed

1. During the sterilization process, the sterilization process can be monitored by the indicator light or display on the device.

2. The sterilization process generally lasts for a period of time, and the specific time depends on the model of the equipment and the sterilization parameters. During this period of time, do not turn on the equipment to avoid destroying the sterilization effect.

3. After waiting for the sterilization process to be completed, the sterilizer will sound a prompt or the indicator light will light up, indicating that the sterilization is complete.

Step 4: Take out the items

1. Turn off the power switch of the sterilizer and disconnect the power cord.

2. Open the chamber door of the device and carefully take out the sterilized items. Be careful not to touch the sterilized items to avoid contamination.

3. Place the removed items on a clean work surface, check whether the items are dry, and wipe them clean with sterile paper towels if necessary.