Mobile Invasive and Noninvasive Combined ICU Breathing Ventilator

Model: CNME010401

Technical Specification:

Ventilation Modes	VCV(A/C) PCV(A/C) PRVC SIMVIVCV)+PSV SIMV(POV)+PSV SIMV(PRVC)+PSV SPONT/CPAP+PSV BIVENT+PSV NIV/CPAP NIV-T NIV-S/T
Parameters	Tidal Volume: 20-2000 ml Respiration Rate: 1-80 bpm Tinsp: 0.2~9 s Tslope: 0-2 s Tpause: 0~4 s I:E Ratio: 1:10-4:1 FiO2: 21 %~100% Trigger Sensitivity: Pressure (-20~0 cmH2O, above PEEP) Flow (0.5~20 LPM) PEEP: 0~35 omH2O Psupport: 0~70 omH2O Pinsp: 5~70 omH2O
Special Procedures	Apnea Ventilation Smart Suction Manual Breath Insp/ Exp Hold ETCO2 Measurement Nebulization Waveform Freeze
Monitoring	Pressure Value: Ppeak, Pplat, Pmean, Pmin, PEEP Volume / Flow Value: Vti, Vte, MV, MVspont Time Value: ftotal, fspont, l:E Real Time Curves: Pressure-Time, Flow-Time, Volume-Time waveforms Pressure-Volume, Volume-Flow, Flow-Pressure loops Gas Monitoring: FiO2, ETCO2 Calculated Values: Compliance(C) Resistance(B) MVleak RSBI WOB PEEPi
Alarm	Paw high/low MVe high/low Circuit disconnection FiO2 high/low Inspiration/Expiratory tidal volume low High Respiration Rate Apnea AC Failure Nebulizer On Low Battery Air/O2 supply down High/Low PEEP Leakage out of range Occlusion
Technical Data	Screen: 12”TFT color touch screen (detachable) Supply Gas: O2, 0.28~0.6 MPa Power Supply: AC100~240 V, 50 Hz/60 Hz Communication Interface: RS-232 Port, Nurse call Port, Ethernet Port Dimension (WxDxH): 322 mm x 375 mm x 366 mm (Main Unit) 547mmx675mmx950mm(Cart) Weight: 12.5 kg (Main Unit) 25 kg (Cart)

Superior Mobile ICU ventilator

Comprehensive ICU ventilator including BIVENT and PRVC

Compact, big capacity battery, no air compressor, intra-hospital mobility

Flexible device configuration: equipped on a trolley, bed or ceiling pendant

Cost Effective Solution

Unique metal-based, autoclaved, heated exhalation valve

Built-in flow sensor, non-consumable design

Upgradeable ventilation system software, with an available USB port

Safe Ventilation Through Whole Treatment Phase

Initial Treatment Phase

Noninvasive ventilation mode associated with decrease incubation rates, shortened patient stays, improved patient comfort, and a reduced risk of cross infection

Preset patient's height and IBW. Reduce clinician's workload

Stable Condition Phase

PRVC and BIVENT employ lung-protective strategies, delivering intelligent ventilation

Comprehensive lung mechanics monitoring include compliance, airway resistance, PEEPi and time constant

Three waveforms & three loops with user-friendly display provide a continuous monitoring of the patient's condition

Weaning Phase

Various ventilation modes enhance the weaning process

The unique trigger and leakage compensation system safeguards each and every patient breath resulting in smooth and comfortable breathing, avoiding extra workload on the patient and promoting recovery

RSBI and WOB provide accurate reference for weaning

Rehab Phase

Data export port provides connection to hospital monitors and Patient Data Management Systems

Provides pressure support for the patient when spontaneous breathing is present

An Optimal Combination of Invasive and Noninvasive Ventilator

As noninvasive ventilation is used increasingly in a wide range of clinical situations, we offer a dual solution

CNME010401 combines the advantages of a flexible noninvasive ventilator with a full-featured invasive ventilator for the ICU

Optimal patient-ventilator synchrony, increase patient comfort

The Unique Leak Compensation System - Keep precise control on the tidal volume of each breath

delivered to the patient by adjusting compensation dosage automatically

Advanced Trigger Technique - Enhance sensitivity, avoid spurious triggering

Auto-detect and Adjust Leak Compensation